Your Cart

No products in the basket.

Support / FAQs

ALM027: Boss Bow Two

This is a known limitation of the BB2. A trigger or gate firing at the exact same moment at both the clock and signal inputs causes a slight ‘interference’ when switching. This is limited only to this specific use case. 

There is a simple workaround to produce the expected behaviour. The gate patched to the clock input needs to be delayed very very slightly. This can be done by patching it through a fast attack envelope or by using a dedicated gate/trigger delay module. If you are triggering via Pam, make a duplicate of the I/O output for the clock input and delay it slightly by adding a small value to the Phase param (1-5% depending on tempo).

Mailing list sign up: