Your Cart

No products in the basket.

Support / FAQs

ALM023: mmMidi

Firstly check you are using the correct DIN to TRS adapter cable as supplied with the module (It should be a Type B cable) .

To check mmMidi is responding to any midi, hold the mmMidi’s learn button for approx. 1 second to enter learn mode (indicated by a flashing red led) then send a Midi note (i.e by pressing a key on your connected midi keyboard), the led should begin flashing faster. If there is no response and the led speed does not change its likely you are either using the wrong/faulty adapter, your midi cable is faulty or your midi keyboard is not connected/set up correctly.

Mailing list sign up: